Instructions
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting,
also in part, is prohibited. This publication represent the technical status at the time of printing.
© Copyright 2018 by Conrad Electronic SE. 1599558_1628895_1698262-65_V2_1218_02_VTP_m_en
Item no. 1599558 1628895 1698263 1698262 1698265 1698264
Operating voltage 200 - 240 V/AC, 50/60 Hz
Input current
(nominal load)
max. 0.4 A max. 0.6 A max. 0.8 A
Switch on peak current <20 A @ 230 V/AC
On-time 500 ms @ 230 V/AC
Ramp-up time 20 ms @ 230 V/AC
Output voltage
Nominal 12 V/DC
(adjustable
10.8 - 13.6 V/DC)
Nominal 24 V/DC
(adjustable
21.6 - 29 V/DC)
Nominal 12 V/DC
(adjustable
10.8 - 13.6 V/DC)
Nominal 24 V/DC
(adjustable
21.6 - 29 V/DC)
Nominal 12 V/DC
(adjustable
10.8 - 13.6 V/DC)
Nominal 24 V/DC
(adjustable
21.6 - 29 V/DC)
Residual ripple
(nominal load)
typical 120 mVss typical 150 mVss typical 120 mVss typical 150 mVss typical 120 mVss typical 150 mVss
Output current max. 1.25 A max. 0.63 A max. 2.5 A max. 1.25 A max. 5 A max. 2.5 A
Output power max. 15 W max. 30 W max. 60 W
Hold-up time 70 ms @ 230 V/AC 100 ms @ 230 V/AC 120 ms @ 230 V/AC 100 ms @ 230 V/AC
Degree of effectiveness 81% 83% 85% 85% 85% 86%
Behaviour during overload Constant current
Overcurrent protection yes (110 - 160% nominal current)
Surge protection yes
Protection class II
Cable diameter Input/Output: 0.2 - 2.0 mm²
Strip length 7 mm
Suitable top hat rail TS 35/7.5, TS 35/15
Operating environment Temperature -20 °C to +60 °C, air humidity 20% to 90% relative, noncondensing
Storage environment Temperature -40 °C to +80 °C, air humidity 10% to 90% relative, noncondensing
Dimensions (H x W x D) 95 x 25 x 56 mm 97 x 63 x 56 mm 97 x 78 x 56 mm
Weight 80 g 180 g 244 g
Disposal
Electronic devices are recyclable and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the rel-
evant statutory regulations.
For item no. 1698263, 1698262, 1698265, 1698264
Turning to the right in a clockwise direction will increase the output voltage, While
turning to the left in a counter-clockwise direction will decrease the output voltage.
Set the output voltage is small steps and then measure the voltage at
the consumer with a suitable measurement device.
Maintenance
The product does not require any maintenance and should never be disassembled
for any reason. Only an authorised expert may perform repairs.
Technical data