User manual

Operating instructions
Stereo-Headset “TW-260A”
Item no. 1620608
Intended use
The stereo headset is perfect for multimedia applications in computers, multi-player games and
also for listening to music or recording speech etc.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, re etc. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Headset
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• The product is not to be used while driving.
• Do not turn the volume of your audio equipment up too high, as this risks hearing
impairment!
• Take a break and take off the headset, if after a longer period of use you detect,
for example, pressure in your ear.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modications and repairs are to be performed exclusively by an
expert or at a qualied shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1620608_V1_0118_02_mxs_m_en
Operation
• Insert the pink coloured plug, with the small microphone symbol, into the MIC jack of your
audio equipment and the green coloured plug, with a headphone symbol, into the headphone
jack of your audio equipment.
Be careful to only insert the plug into the appropriate input/output of the audio equipment!
Read the operating instructions of your audio equipment.
• Put the headset on so that the microphone is on the left side.
• The cable includes a volume control for the headset (rst set the required maximum volume
on the audio equipment).
• The microphone volume of a recording is adjustable using the audio equipment.
The operating system “Windows” may require the “microphone amplier” is activated, if not,
the recording level is only very low.
Care and cleaning
• Disconnect the product from the connected devices before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, ber-free cloth.
• Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus full your statutory obligations and contribute to the protection of the
environment.
Technical data
a) Headphones
Frequency range .......................... 50-16,000 Hz
Impedance .................................... 32 Ohm
Connection ................................... 3.5 mm stereo jack
Length of cable ............................. approx. 2 m
Weight .......................................... approx. 203 g (with cable)
approx. 175 g (without cable)
b) Microphone
Frequency range .......................... 20-20,000 Hz
Impedance .................................... 2200 Ohm
Connection ................................... 3.5 mm stereo jack