Instructions

b) LAN set up

In order to integrate the exterior unit into your network via LAN,

proceed as follows. If the door intercom is already connected via

WLAN,resettofactorysettingsrst.

Connect:

• Connectrstthe1to1connectedLANcabletothenetwork

adapter of the exterior unit.

• Connect the opposite side of the LAN cable to your WLAN

router or network switch.

• Plug the AC adapter into the mains socket to power the ex-

terior unit and wait approximately 30 seconds for the start-up

procedure to complete.

Set up:

• In the upper right corner of the app’s main page, tap on +, to

add the exterior unit.

• Tap the button LAN Scan.

• Usually a new device is now shown in the app.

Tap on the white space of the new device.

• If necessary, change the name of the door intercom and enter

a new password.

• Finally, tap the button in the upper right corner to save the set-

tings.

• The app returns to the main page. In the device list the new

WiFi door intercom should now show up as online.