Instructions

If, however, the connection fails, disconnect the inter-

com for a moment from the power supply, then wait for

about 30 seconds until the system is started. Press the

arrow in the upper left corner, check the WLAN data

once more and try again.

If it still does not work, reset the door intercom system

to the factory settings and try once more.

 Alternatively,youmayrstsetuptheWiFidoorinter-

com via a LAN cable and later in settings you can con-

nect to WLAN manually.

• Whenthecongurationwassuccessful,conrmwithOK. Now

the app automatically switches to the main screen.