Instructions

7. Installation and connection
a) Installing the exterior unit
The exterior unit should be installed in the protected outdoor area
near the front door (e.g., under a canopy), so that a visitor would
have to stand directly in front of it to press the bell push button.
The exterior unit should be installed in an environment
that features better wireless signal strength. Use a
repeater as well, if the signal at the preferred location
isinsufcient.Alternatively,youcanalsoconnect the
exterior unit to your network via a LAN cable.
Select the installation height so that the
camera points towards the face of the visi-
tor.
Fasten the weatherproof frame of the exte-
rior unit to the wall using suitable screws,
and if required, wall plugs. Alternatively,
the exterior unit can be glued to the wall
merely by means of the adhesive surface
on the back.
An appropriate opening in the centre of the frame to route the
cables is provided. A drill hole with a diameter of 8 - 10 mm is
required for the wall duct.
13