Instructions

ManualsBrandsBasetech ManualsBuilding TechnologyBasetech In-line socket with switch 2-pin White

• Never pour any liquids over electrical devices or put objects lled with liquid right next to the

device. If liquid or an object enters the interior of the device nevertheless, rst power down the

respective socket (e.g. switch off circuit breaker) and then pull the mains plug from the mains

socket. Discontinue use and take the product to a specialist repair centre.

• Never use the product immediately after it has been brought from a cold room into a warm

one. The condensation generated could destroy the product. Allow the product to reach room

temperature before connecting it to the power supply and putting it to use. This may take

several hours.

• The mains socket that the adapter is plugged into must be easily accessible.

• Only disconnect the plug from the mains using the grips provided.

• Unplug the mains plug from the mains socket if you do not use the device for an extended

period of time.

• Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.

• Never plug in or unplug the mains plug when your hands are wet.

• Do not overload the product! Pay attention to the maximum permitted total power consumption

of all connected loads in the "Technical data" section.

• Insert the mains plug into a wall-mounted socket.

• Do not cover the plug when it is in use. The plug and the connection cable may become warm

when there is a high connected load. This constitutes a re hazard!

• Only use the product in temperate climates. It is not suitable for use in tropical areas.

Operation

• Turn off the on/off switch (move to "0").

• Insert the plug on the appliance into the protective earth socket on the adapter.

• Plug the adapter into a properly grounded mains socket (wall-mounted socket).

• The adapter can be switched on and off using the on/off switch (I = on, 0 = off)

• The LED indicator turns red when the adapter is switched on.

• The LED indicator turns off when you move the switch to the off position.

Maintenance and cleaning

• Before cleaning the adapter, unplug it from the mains socket to disconnect it from the mains voltage.

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the

casing or even impair the functioning of the product.

• Use a dry, lint-free cloth to clean the product. Dust can be easily removed using a soft and clean

long-haired brush and a vacuum cleaner.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste.

At the end of its service life, dispose of the product according to the relevant statutory regulations.

You thus full your statutory obligations and contribute to the protection of the environment.

Technical data

Operating voltage/current ..................... 230 V/AC, 50 Hz, 16 A

Total connected load ............................. Max. 3680 W

Mains switch ......................................... 2-pole (L/N)

Housing material ................................... Polypropylene

Operating conditions ............................. 0 to +40 °C, 20 - 85 % relative humidity (non-condensing)

Storage conditions ................................ -10 to +50 °C, 20 - 85 % relative humidity (non-condensing)

Dimensions (W x H x D) ....................... 50 x 76 x 90 mm

Weight ..................................................80 g

Operating instructions

Adapter with switch

Item no. 1526578

Intended use

This product enables you to connect an electrical device to a mains socket. The electrical device can

be switched on and off using an on/off switch. The adapter comes with a built-in LED indicator and child

protection.

It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be

avoided under all circumstances.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product

for purposes other than those described above, the product may be damaged. In addition, improper use can

cause hazards such as short circuiting, re, electric shock etc. Read the instructions carefully and keep them.

Make this product available to third parties only together with its operating instructions.

This product complies with the statutory national and European requirements. All company names and

Delivery content

• Adapter

• Operating instructions

Up-to-date Operating Instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code on this page.

Follow the instructions on the website.

Explanation of symbols

The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an

electric shock.

This symbol is used to highlight important information in these operating instructions. Always

read this information carefully.

This symbol indicates special information and advice on how to use the product.

All metal parts that may carry a voltage in the event of a fault during operation and maintenance

must be connected to the protective earth conductor.

Safety instructions

Read the operating instructions carefully and especially observe the safety information.

If you do not follow the safety instructions and information on proper handling in this

manual, we assume no liability for any resulting personal injury or damage to property.

Such cases will invalidate the warranty/guarantee.

a) General information

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become dangerous playing

material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,

moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and protect it

from any accidental use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage

the product.

• Also observe the safety and operating instructions of any other devices which are connected

to the product.

• Consult a technician if you are not sure how to use or connect the product.

• Maintenance, modications and repairs are to be performed exclusively by an expert or at a

qualied shop.

• If you have questions which remain unanswered by these operating instructions, contact our

technical support service or other technical personnel.

b) Electrical safety

• Before connecting the adapter to the mains, check that your local AC mains voltage matches

the specications on the nameplate.

• This product is built according to protection class I. It must only be connected to a mains

socket with a protective earth contact.

• Do not connect the product in series!

• The plug is only isolated from the mains when it is disconnected from the mains socket.

• Only use the adapter in dry rooms!

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.