Instructions

51
Problem Possible cause and solution
Theerrorcode"ERROR--1"
appears on the display and beeps
are sounding: The product is
overheated.
Let the microwave cool down to room temperature. As soon as the
microwave oven has reached room temperature, the beeps cease
sounding. Press the button Stopp/Sperre(stop/lock).
Theerrorcode"ERROR--2"
appears on the display and beeps
are sounding: The product is
undercooled.
Let the microwave oven warm up to room temperature. As soon as
the microwave oven has reached room temperature, the beeps cease
sounding. Press the button Stopp/Sperre(stop/lock).
Theerrorcode"ERROR--3"
appears on the display and beeps
are sounding: The microwave
sensor is defective.
Press the button Stopp/Sperre(stop/lock).Thebeepsceasesounding.
Consultaspecialistworkshop.
15. Care and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
housing or even impair the functioning of the product. Do not use harsh or scratching brushes, sponges,
sharp metal scrapers etc., as they scratch the surfaces and may damage the view window.
Do not use steam cleaners to clean the product. The steam is under pressure and it may condense on
electrical components inside the device and cause short circuits.
Never submerge the product or the mains cable in water or other liquids!
 Cleaningisanimportantaspectofhandlingtheproductsafelyandpreventsmanyheathhazards.
• Turn off the product and disconnect it from the power outlet before cleaning. Let the product cool down to room
temperature.
• Open the door.
• Cleantheproductandremovefoodresidueregularly.Failuretocleantheproductregularlycanimpairthesurfaces
and greatly reduce its service life. It may also impair the safety and functioning of the device.
• Wipeawayanycondensationordropsofwaterwithasoftcloth.Condensationcanoccurwhenmoistaircomes
intocontactwithacoldsurface.Atveryhightemperatures,oilandgreasemayevaporateandformasagreasylm
on surfaces after cooling down.
• Cleanthehousingexteriorwithadamp,softcloth.Themainscableshouldbecleanedwithadrycloth.Makesure
that no water enters the openings of devices into the product.
• Use a damp cloth to clean the door, the view window, the door seal, the cooking chamber and all adjacent
components.