User manual

18
8. Operating elements
1
3 4 5 6 72
1 Blade
2 Blending attachment
3 Motor
4 Speed switch I
5 Speed switch II
6 Speed dial
7 Mains cable with mains plug
9. Setting up the blender
• Removeallthecomponentsfromthepackagingandcheckthatnopartsaremissingordamaged.Donotusethe
blender if any parts are damaged.
• Cleanthemotor(3)andblendingattachment(2)withtheblade(1)asdescribedinsection“11.Careandcleaning”.
This is necessary to remove any residues left over from the manufacturing process.
10. Operation
The blade is very sharp. Exercise caution when assembling, cleaning and using the appliance. Never touch
the blade when the blender is on or put any kitchen utensils into the mixing bowl. This poses a risk of injury.
Never remove the blending attachment (2) when the blender is on. Wait until the blade has come to a
complete standstill.
Always turn off the blender before removing the blending attachment or connecting/disconnecting the
blender to/from the mains.
Never allow the appliance to come into contact with hot surfaces (e.g. stoves). Do not use the product
neartoopenames.
The blender must only be used on dry, level, heat-resistant and non-slip surfaces (e.g. kitchen worktops).