User manual

36
12. Troubleshooting
Problem Possible solution
"E01" is displayed. The mixing jug or the
lid is not inserted correctly.
For more information, see “10. Inserting, removing and using the
attachments” on page 28.
"E04" is displayed and the
ÜBERLADUNG (overload) indicator (I) is
on: The motor is overloaded.
Unplug the multi-cooker from the mains socket and let it cool down to
room temperature. Remove some of the contents of the mixing jug, or
remove the food that is blocking the blade unit. Plug the multi-cooker
back into the mains socket and turn it on. If it fails to turn on, contact
your nearest service centre.
"E03" is displayed and the
ÜBERHITZUNG (overheat) indicator (A)
is on: The overheat protection feature
was activated.
Unplug the multi-cooker from the mains socket and let it cool down to
room temperature. Fill the mixing jug to at least the 0.5 L marking, and
then plug the multi-cooker into the mains socket and turn it on. If it fails
to turn on, contact your nearest service centre.
"FOFF" is displayed. The scales are
overloaded.
Remove the load from the scales immediately.
The mixing jug lid doesn't open. Unlock the mixing jug from the base station. You should now be able
to press the lid release button.
The cooking process does not start. Ensure that you have set the temperature, speed or timer.
The kneading program does not work. Wait until the heating plate has cooled down to less than 50 ºC.
The TURBO button is unresponsive. The turbo function is not available when you select a cooking program.
13. Care and cleaning
Thebasestation(2)isnotdishwasher-safe.Neverallowthebasestationorthemainscabletocomeinto
contactwithwaterorotherliquids.Neverrinsethebasestationormainscableinrunningwater,asthismay
cause an electric shock.
The blade unit is very sharp and has the potential to cause injury. Always wait until the blade has come to a
complete standstill before removing or cleaning the blade unit.
Neveruseaggressivedetergents,rubbingalcoholorotherchemicalsolutions,asthesecoulddamagethe
casing or even impair the functioning of the product.
• Move the on/off switch (5) to the O position to turn the multi-cooker off, and then unplug the multi-cooker from the
mains socket.
• Remove all attachments. For more information, see “10. Inserting, removing and using the attachments” on page
28. Clean the attachments with warm water and washing-up liquid. The attachments are not dishwasher safe.
• Use a damp, soft cloth to clean the motor unit. The mains cable should be cleaned with a dry cloth.
• Afteryouhavenishedcleaninganddryingalloftheattachments,reassemblethemulti-cookerasdescribedin
section “10. Inserting, removing and using the attachments” on page 28.
• Store the multi-cooker in a dry, dust-free location out of the reach of children.