User manual

• If no buttons are pressed within 60 seconds, the watch will automatically revert to the time
display.
Hold down the SEL button to move through the values more quickly.
12. Time display
If the watch does not display the time, keep pressing the MODE button until TIME is shown on
the display. The time and the date will be displayed automatically after three seconds.
a) Displaying two time zones
• Hold down the SEL button for approximately three seconds to display a second time zone.
• Tocongurethetimeforthesecondtimezone,holddowntheSETbuttonforthreeseconds.
"HOLD TO SET" will be displayed while you hold down the button. Release the button when
"12H" or "24H" is shown on the display.
• To switch between 12 and 24-hour mode, press the SEL button.
• Conguretheremainingsettings(seconds,minutesandhours)asdescribedinsection11
("Initial setup"). Use the SEL button to select the value and then apply the setting using the
SET button.
• Press the MODE button to exit the setting mode and save all settings.
• This feature is particularly useful for travellers or people that often make international calls.
b) Alarm
When the time is displayed, briey press the SEL button to display the current alarm time
("ALARM" will be shown at the bottom of the display).
Setting the alarm time
• Hold down the SET button for three seconds. "HOLD TO SET" will be displayed while you
hold down the button. Release the button when the time is displayed and the minute value
ashes.
• ConguretheminutevalueusingtheSELbutton.
• BrieypresstheSETbuttontogotothehourvalue.CongurethehourvalueusingtheSEL
button.
• BrieypresstheSETbuttontogotothemonthvalue.Congurethemonthvalueusingthe
SEL button. Select "--" to skip the month setting.
37