User manual
24
13. Cleaning and care
Cleantheproductbeforersttimeuse,aftereachuseorafterithasbeenunusedforalongerperiodof
time.
The motor assembly and the mains cable are not dishwasher-proof. Do not immerse the motor assembly
and the mains cable into water or other liquids. Never rinse them under running water.
Before cleaning, disconnect the product from the mains and wait until it has cooled down to room
temperature.
Thebladesofthecentrifugalscreenareverysharp!Riskofinjury!
Always wait until the centrifugal screen has come to a complete stop before removing and cleaning parts.
Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical solutions
since these can penetrate the housing or impair functionality. Do not use hard or scouring brushes,
sponges, or similar.
There are no user-serviceable parts inside the product; never disassemble the motor assembly.
• Releasethelockingarmandremovethecover.Liftthecentrifugalscreenholderincludingthecentrifugalscreen
up to remove them.
• Removethepulpcollectorfromthecollectormountandemptytheformerone.
• Clean all removable parts with warm water and a mild detergent, or wash them in a dishwasher.
• Cleanthecentrifugalscreenwiththecleaningbrushprovided.Rinsethecleaningbrushunderrunningwater.
• Clean the exterior surface of the motor assembly with a dry, lint-free cloth. To prevent scratch marks, do not apply
too much force on the surface during cleaning.
• After having cleaned and dried all parts, reassemble the juicer as described in chapter “a) Assembly, installation
and connection”.
• Store the product out of reach of children at a dry and dust-free location protected from direct sunlight.
14. Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product in accordance with applicable regulatory guidelines.
Youthusfullyourstatutoryobligationsandcontributetotheprotectionoftheenvironment.