Instructions

24
b) Switching the product on/off
1. Switching on: Slide the 0/1 switch (1) to 1 position.
2. Allow the tool to reach full speed before working on a workpiece.
3. Changing the speed: Slide the speed control dial (3) between 1 (slowest) and 6 (fastest).
4. Switching off: Slide the 0/1 switch to 0 position.
c) Typical applications
A large variety of accessories are available on the market for sawing/cutting, scraping, and sanding. 3 most common
types are described below. Refer to manufacturer’s information regarding the application and intended use of a given
accessory.
This product incorporates a built-in standardised Oscillating Interface System (OIS) intake for third-party
accessories. Accessories with other ttings are not compatible with this product. When purchasing third-
party accessories, look for OIS indication on the packaging.
Accessory Application
Saw blade
(Conrad Item No. 815501 / 815503)
Use for sawing/cutting of nails/screws, wood and
plastics.
Tips:
• Use high speeds (5-6).
• Use moderate pressure to avoid burning or
scorching a workpiece.
Plunge saw blade / Semi circle saw
(Conrad Item No. 821560)
Use for:
• Sawing of openings in a surface
• Sawing of gaps
• Small repairs to tiled areas indoors and to brick
walls.
Tips:
• Use high speeds (5-6).
• Plunge cutting is allowed only in soft materials such
as wood or plasterboard.
• Use moderate pressure to avoid burning or
scorching a workpiece.