User manual
• Keep the batteries out of the reach of children. Do not leave batteries lying around,
as they may be swallowed by children or pets.
• Replace all of the batteries at the same time. Mixing old and new batteries may
lead to battery leakage and thus to damage to the device.
• Batteries must not be dismantled, short-circuited or thrown into re. Never charge
conventional, non-rechargeable batteries. There is a risk of explosion.
Operating elements
8
5
3
2
1
4
6
7
9
1 Water tap connection,
inlet
2 LC display
3
button, up
4
button
5 OK button
6
button, down
7
button
8 Battery compartment,
back (not visible)
9 Hose connection, outlet
Operation
a) Inserting/changing the battery
• Remove the battery compartment (8) from the housing.
• Insert 2 1.5 V type AA batteries into the battery compartment. Observe correct polarity (+/-),
as indicated in the battery compartment.
• Insert the battery compartment back into the housing.
• Replace the batteries when the LC display shows the icon for low battery, but at least
once a year.
b) Water and hose connection
• You may connect to a water tap before or after programming.
• Connect the water tap connector (1) with a suitable water tap.
• Connect a water hose with a suitable connector to the hose connector (9).
• Open the water tap and then leave it open. The water pressure may not exceed 6 bar. At the
programmed time, water will exit the hose.
c) Basic settings
WATER DAY
TODAY
START TIME
HOW LONG
WATER CYCLE
TIME
ECO FUNCTION
PROGRAM
WATER DAY
TODAY
START TIME
HOW LONG
WATER CYCLE
TIME
ECO FUNCTION
PROGRAM
WATER DAY
TODAY
START TIME
HOW LONG
WATER CYCLE
TIME
ECO FUNCTION
PROGRAM
WATER DAY
TODAY
START TIME
HOW LONG
WATER CYCLE
TIME
ECO FUNCTION
PROGRAM
25251-11X6.9 cm
(1)
山貓_多功能型
(3)
(2)
(2)
Follow the cursor position during programming. Set the time
with the (7) or (4) buttons. Conrm settings with the
OK (5) or (6) buttons. The cursor jumps to the next setting.
Per default, the time is displayed in the 12-hour format. Press
and hold the OK button for approx. 10 seconds until the LC
display switches. The time is in the 24-hour format. Press and
hold the OK button for approx. 10 seconds again to return to
the 12-hour format.
• Position TIME: Set the temperature with the or buttons. Conrm with the OK button
or press the key.
• Position TODAY: Set the current weekday. The weekday is shown by the cursor icon .
The weekdays are shown abbreviated in English:
SU (Sunday) MO (Monday) TU (Tuesday) WED (Wednesday)
THU (Thursday) FRI (Friday) SAT (Saturday).
Conrm your selection with the OK or button.
• Position WATER DAY: The cursor changes to the setting for the watering day and displays
the icon. Conrm the desired watering day with the OK button. The icon is displayed
to conrm your setting. By pressing the OK button, you can delete the setting again. Switch
to the another day or to position “2nd” or “3rd” (every second or third day) with the or
buttons. The “2nd” or “3rd” positions offer the possibility of enabling irrigation every second
(2nd) or third (3rd) day instead of a specic weekday.
• Switch to the next setting level (water cycle) by pressing the key.
Operating instructions
Water timer
Item no. 1530891
Intended use
The product is intended for automatic plant irrigation. The product is waterproof per IPX7 and
is suitable for outdoor use. The product can be used for automatic irrigation at set times in
intervals, e.g. in gardens. Power is supplied via two 1.5 V type AA batteries (not included in
delivery).
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as short circuits. Read the instructions carefully and
store them in a safe place. Make this product available to third parties only together with its
operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Water timer
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
IPX7 The product is protected against brief immersion in water.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts,
ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• At freezing temperatures, disconnect the product from the water tap and hose.
Store the product in a frost-free location.
• Avoid pressure above 6 bar to avoid damage.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Batteries
• Correct polarity must be observed while inserting the batteries.
• Remove the batteries, if you are not going to use the device for a while, to prevent
damage from leaking. Leaking or damaged batteries might cause acid burns
when in contact with skin, Always use protective gloves when handling damaged
batteries.