User manual

32
• Close the indoor unit again, replace the T-shaped cover and screw it down tightly.
• The indoor unit is installed via the small, L-shaped metal bracket. Attach the metal bracket to the wall via a suitable
screw (and poss. a dowel).
When drilling or tightening screws, ensure that no wires or lines are damaged!
• Above the screw for the metal bracket, another screw must be put into the wall at a distance of 100 mm.
• Now suspend the indoor unit on the upper screw from the opening (29). Then attach the lower end (31) of the indoor
unit to the metal bracket with a screw.