Instructions

33
f) Setting Ring for Torque
Turning the torque setting ring (2) permits setting of the desired torque from
A
B
which onwards the slip clutch will engage. This will prevent over-turning, e.g.
whenturninginascrew.Thescrewwillendushwiththematerialsurface
when the torque setting is chosen accordingly.
The torque setting has 17 different positions and an additional position for the
drilling function (drill symbol, ideal for drilling holes).
Low setting: Soft materials, small screws
High setting: Hard materials, large screws
Drill symbol: Slip clutch off
When turning out screws, a higher setting or the “drill” setting (drill
symbol) should be chosen.
g) LED
When the on/off switch (8) is pushed, the LED (9) will be activated automatically
to permit lighting of the working position.