Operating Guide

4. Remove any dirt or accumulated debris from the

sump pit and surrounding area. Clean out the

vent hole in the discharge pipe.

NOTE: If the sump basin is larger than 18-in.

diameter, the DC pump can be installed with the

primary pump on the same level or slightly higher

than the primary pump. If the sump basin is smaller

than 18-in. diameter, the DC pump will be installed

above the primary sump pump.

5. Disconnect or cut the main discharge pipe and

separate the primary sump pump from the

discharge pipe. Remove the pump from the

sump basin.

115 V

GFCI outlet

DC pump

installed

above primary

pump

Less than 18”

Clean

vent hole

Remove

debris

INSTALLATION INSTRUCTIONS