Manualshelf

How to Guide

ManualsBrandsBasement Sentry ManualsPlumbingBattery backup-HP 12-Volt Thermoplastic Battery-Powered Sump Pump
12
1. Install rigid 1-1/2-in discharge pipe, union,
check valve according to code. NOTE: Backup
pump piping can be discharged directly outside
or connected to existing discharge pipe. BOTH
the primary pump and DC backup pumps will
require check valves in the discharge pipes for
proper operation.
2. Attach backup switch to the discharge pipe of
the battery backup pump.
3. Place a fully-charged, deep-cycle marine battery
inside the battery box. Connect the leads inside
the battery box from the controller to the battery:
Red (+) to battery Red (+), Black (-) to battery
Black (-)
NOTE: The alarm will sound after connecting
the battery. It will continue to sound until all
connections are made and the oat switch is in
the down position.
4. Connect pump power cord, switch cord and AC
adapter plugs to the connection ports in the
top of the battery box lid.
NOTE: The pump will continue to run for an
additional 10 seconds after the oat has been
lowered. The alarm will continue to sound while
the pump is working.
5. Fill the basin with water to check operation.
6. Install a basin cover and gasket on top of the
basin.
Check valve
located in
backup pump
discharge
Check valve
located in
primary pump
discharge
Joined
discharge
pipes
Clamp
Mounting
Bracket
DC Pump
Switch
ADAPTER
FLOAT
SWITCH PUMP
AC Adapter
Cord
Float Switch
Cord
Pump Cord
QUICK START GUIDE. SEE INSTRUCTION
MANUAL FOR COMPLETE DETAILS.
WARNING:
FOR YOUR PROTECTION, ALWAYS DISCONNECT
PUMP FROM POWER SOURCE BEFORE HANDLING.
BATTERY ACID IS CORROSIVE. DO NOT SPILL ON
SKIN, CLOTHING OR BATTERY CHARGER. WEAR
EYE AND HEAD PROTECTION WHEN WORKING
WITH BATTERY. CONNECT AND DISCONNECT DC
OUTPUT TERMINALS ONLY AFTER REMOVING THE
CHARGER FROM THE AC OUTLET. NEVER ALLOW
THE DC TERMINALS TO TOUCH EACH OTHER.
KEEP SPARKS AND FLAME
(
PILOT LIGHT
)
AWAY
FROM BATTERY.
BE SURE TO READ AND UNDERSTAND
INSTRUCTIONS BEFORE INSTALLING OR
OPERATING THIS PUMP.
AUTOMATIC
EMERGENCY
BACKUP SUMP
PUMP SYSTEM
MODEL #
STBB100
BasementSentry.com Toll Free Help Line: 1-800-742-5044
SW1421 A
A 12V Pump
B Battery Box
C Switch
D Charger
E 90º Elbow
F Pipe clamp
A
B
C
D
E
F

Summary of content (2 pages)