Product Manual

dual-handled stabilizer (12-0583)
parts included:
to assemble:
1. handle
2. bracket
3. plates
4. 4 screws
5. 4 wing nuts
required tools: Phillips head screwdriver
1. Place bracket onto the handle along
the guides lining up the holes.
3.
With the handle/bracket facing up,
place the dynamometer on the bracket
resting it into the two recessed circles.
4. Secure the dynamometer in place
with the two plates and wingnuts.
assembly instructions
2. Secure the bracket to the handle
putting the screws in from the back.
assembled unit above
shown with dynamometer
(not included)
1
5
4
2
3
tel: [phone]
fax: [phone]
email: [e-mail]
www.Fab-Ent.com Baseline
®
is a trademark of Goldberg © 2011 FEI, all rights reserved
Fabrication Enterprises Inc.
PO Box 1500
White Plains, NY 10602
USA
Authorized CE representative:
RMS UK Ltd.
28 Trinity Road
Nailsea, Somerset BS48 4NU (UK)
ver 1/11