Product Manual

USAGE
Snap appropriate grip into the wrist dynamometer body to secure unit for test.
hold unit either by grasping the dynamometer body, or using a single or dual grip
handle. Set max indicator to zero. Have patient twist grip with maximum force,
note reading. Re-set to zero for next test.
CALIBRATION
The BASELINE® wrist dynamometer is a sealed unit and calibrated at the facto-
ry. However, if indicator needle is out of “zero-range” it may be reset. Remove
clear cover by turning counter clockwise. Adjustment pin located by 220Kg mark-
ing. Turn pin to reset to zero. If unit is leaking hydraulic fluid it should be returned
to factory for repair and recalibration.
WARRANTY
The BASELINE® Hydraulic Wrist Dynamometer is warranteed for 1 (one) full year
(parts and labor) from date of purchase. If unit needs repair contact your local
dealer or Fabrication Enterprises, Inc.
Fabrication Enterprises, Inc.
3 Westchester Plaza STE 111
Elmsford, NY 10523
U.S.A.
TEL: [phone]
FAX: [phone]
more info: www.BaselineProducts.net
HOW TO INSTALL HANDLES
Questions/comments? [e-mail]
Post Office Box 1500, White Plains, New York 10602 (USA)
Tel: [phone] FAX: [phone]
Questions/comments? [e-mail]
Post Office Box 1500, White Plains, New York 10602 (USA)
Tel: [phone] FAX: [phone]
About the Baseline® Wrist Dynamometer

Simply and accurately measures the strength of the wrist
muscles during flexion, extension, abduction and adduction and the
forearm muscles during supination and pronation.

The Baseline® wrist/forearm dynamometer features the time
proven hydraulic system used in the industry accepted
Baseline® and Jamar® hand dynamometers.

For hand held use, the dynamometer can accommodate the
Baseline® single-grip and dual-grip handle.

Maximum reading remains until the unit is reset.

The strength reading can be viewed as pounds or kilograms.

Comes with portable carrying case.

Made in USA with a 1-year manufacturers warrantee.

CE certified.
d
a
c
b
e
f
Baseline® wrist/forearm dynamometer

Includes door knob grip and case.
12-0250 analog (dial) readout
12-0251 digital (LCD) readout
measurement accessories

Measurement accessories easily snap on and off.
12-0261 [d] door knob grip [supination / pronation]
12-0262 [a] shovel handle [supination / pronation]
12-0263 [c] lever handle [abduction / adduction]
12-0264 [b] rod/pipe grip [flexion / extension]
12-0385 [e] single grip handle
12-0389 [f] dual grip handle
12-0266 table-mount bracket
Dual Grip Handle
Single Grip Handle
Single Grip Handle:
1. Remove screws “D” and “J”
2. Position single grip handle and apply 2 thumb screws to connect the handle to the
openings at “D” and “H”
Dual Grip Handle:
1. Remove screws “A” “D” E” and “H”
2. Position dual grip handle and apply 4 thumb screws to connect the handle to the
openings at “A” “D” “E” and “H”
A B C D
E F G H
underside of wrist
dynamometer