Manual

Materials and Tools

 Tools as needed for constructing the concrete form (drill, screwdriver, marker, tape measure, level,

etc.)

 2” x 6” lumber for constructing the concrete form

 Concrete

 Tools as needed for finishing the concrete

 Tools as needed for working with conduit (cutter, etc.)

 Hardware for the electrical power and irrigation wiring (½” conduit, wire, wire nuts, etc.) and tools as

needed

 4 stainless steel anchor bolts with washers and nuts

 Wrench for attaching the nuts to the anchor bolts

Baseline X-Series Pedestal

Installation Guide

1-866-294-5847 Rev 3.8.2013 www.baselinesystems.com

X-Series Pedestal

The X-series pedestal units are designed to be mounted on a concrete pad and hold a Baseline

controller in an X cabinet.

Remove all packaging materials from the pieces.

Remove the door from the pedestal.

Identify all parts.

X Cabinet

Pedestal

Pedestal Base

Controller Mounting Bracket

PAGE 1
Baseline X-Series Pedestal Installation Guide X-Series Pedestal The X-series pedestal units are designed to be mounted on a concrete pad and hold a Baseline controller in an X cabinet. Remove all packaging materials from the pieces. X Cabinet Remove the door from the pedestal. Identify all parts. Pedestal Base Pedestal Controller Mounting Bracket Materials and Tools  Tools as needed for constructing the concrete form (drill, screwdriver, marker, tape measure, level, etc.
PAGE 2
Baseline X Pedestal Installation Guide Mount the Pedestal Base to the Concrete Pad 1. Build a form for the concrete pad. 2. Pour the concrete, and finish the top with a slope for drainage. 3. Push the heads of 4 stainless steel anchor bolts into the wet concrete in a pattern that matches the mounting holes in the pedestal base. The concrete should form a smooth, flat surface for the base to bolt onto. 4.