Manual

Baseline FlowStation User Manual
Disabled
The POC is disabled at the controller or the FlowStation
Disconnected
The controller sharing the POC is disconnected
Message
The POC has an error and is not running
Flow Fault
The POC has a flow fault
Viewing Additional POC Status Details
1. Display the POC Status Report as described in the Viewing the POC Status Report topic above.
2. Press the

button. The POC Status details
for the first POC display.
 POC ID – The sequential number
assigned to the POC in the FlowStation
 POC Status – The current status of the
POC
 Actual Flow – The amount of water that
is currently flowing through the POC shown in gallons per minute (GPM)
 Total Usage – Shows the sum of all water usage on the connected flow meters in gallons
3. Perform one of the following actions:
 To view the status details for the next POC, press the

button.
 To return to the Status Report menu, press the BACK button.
Viewing the Mainline Status Report
1. Press the RUN button.
2. Press the BACK button. The Status Report
menu displays.
3. Press the

or

button to highlight Mainline
Status, and then press the OK button. The
Mainline Status screen displays.
The mainlines are represented by icons.
4. To return to the Status Report menu, press
the BACK button.
4 – Configuring the FlowStation Page 35