Manual

Baseline FlowStation User Manual
Setting Up the Screen Display
You can adjust the brightness and contrast on the FlowStation display screen to provide better
visibility in a variety of lighting conditions and to accommodate a variety of viewing angles. You can
also set a time limit for the backlight to be turned off.
1. Press the System Setup button. The System Setup menu displays.
2. Press the

button to highlight the Display Setup option, and then press the OK button to
select it. The Display Setup screen displays.
3. Press the + or – button to change the number in the Screen Contrast field. A lower number
indicates less contrast and a higher number indicates more contrast. To rapidly increase or
decrease the value, press and hold the + button or the – button.
4. When the screen contrast appears to be suitable for the conditions, stop changing the
number.
5. Press the

button to move to the Brightness field, and then press the + or – button to
change the number.
Note: You cannot increase the value in the Brightness field greater than 100%.
6. Press the

button to move to the Timeout field, and then press the + or – button to change
the number. This setting enables you to control how long the display remains illuminated
before it goes dark.
Setting Up Security for the FlowStation
In the FlowStation you can set up the following levels of security access:
• Admin – Grants access to all FlowStation functions
• Programmer – Grants access to all FlowStation functions except the Security function
• Operator – Grants access to the Main screen and the Status Report menu
After you enable the security and set up the PINs, restart the FlowStation. Users will be prompted
to enter their PIN when they press one of the menu buttons on the FlowStation. If the user does
not have access to the menu, he/she will see the message “Invalid PIN.”
IMPORTANT NOTE! When a user accesses the FlowStation with a PIN, the FlowStation will maintain
that level of access for 1 hour. When that time is up, anyone who tries to use the FlowStation will
be prompted to enter a PIN.
1. Press the System Setup button. The System Setup menu displays.
2. Press the

button to highlight the Security
Setup option, and then press the OK button to
select it. The Security Setup screen displays.
3. Press the + button to display a checkmark in
the Enabled field. The PIN fields for the
security levels display.
4 – Configuring the FlowStation Page 25