Manual

BaseStation 3200 Advanced Irrigation Controller Manual
If you want your irrigation system to have this capability, you need to assign the various pieces of
your system to a corresponding mainline. A mainline can have flow devices, master valves, and
programs (which contain the
zones connected to the
mainline). The illustration to
the right shows how you can
configure a site that has two
mainlines. Note that mainline
2 has two POCs, each with a
master valve and flow device.
You will find it helpful to have
a diagram of your site when
you are configuring the
BaseStation 3200.
Most sites are served by a single mainline, meaning that all water is distributed through a single
pipe, even though there may be multiple POCs that supply water to that pipe or mainline. For this
reason, mainline 1 is the default for all flow devices, master valves, and programs.
Page 73