User Guide

Operating Instructions
1.Startthemachine
Pressthepowerkeytoturnthemachineon.
2.AdjustSettings
Usetheupanddownarrowkeystoadjustyourdesiredsetpoint (typically50-55%).
3.StoptheMachine
Pressthepowerkeyagainandthemachinewillstop.Notethefanwillcontinuetooperatefor1minute
aftertheunithasturnedoff.
NOTE:Donotdisconnectthepowercordtoforcetheunittostop.Alwaysusethepowerbutton.
4.WaterDrainage
Duringnormaloperation,theAirWerx90willautomaticallydrainbytheforceofgravity.Ifyouwantto
moveorstorethemachine,waitatleast10minutestoallowthemachinetocompletelydefrost,then
leanunitgentlytowardsdraintoensurethatitiscompletelydrained.
7
1.On/Off(Power)Button
Presstheon/offbuttonandthemachinewillstart
running (twobeeps).Pressthebuttonagaintothe
turnthemachineoff.
2.UpButton /DownButton
UsetheUpandDownarrowbuttonstoadjustthe
humiditylevel.
3.ModeM
Usethemodebuttontoswitchbetween
dehumidificationandaductedapplication.
The symbolonthedisplayboardindicatesthesensorontheremotecontrolisbeingutilized.
The symbolonthedisplayboardindicatesthesensoronthedehumidifierisbeingutilized.
4.Temperature
Pressthetemperaturebuttontodisplaythecurrenttemperatureonthescreen.Pressthebuttonagainto
turnoffthedisplay.
5.Continuous
Pressthisbuttontoswitchtheunitintocontinuousmode.  willappearonthedisplaytoindicate
continuousmode.
6.DrainPump
Pressingthedrainpumpbuttonwillremovewaterfromthepumpreservoir,sotheunitcansafelymoved
orstored.
NOTE:THISFUNCTIONISONLYAVAILABLEONTHEAirwerx90X MODEL.