User Guide

4
Step#1:Placedehumidifieronalevelsurface.
Iftheunitishandledinsuchamannerthatthecompressordidnotremainintheuprightposition,youwill
needtoplace it onalevelsurfaceandwaitaminimumof2hoursbeforeturningtheunit "on".
NOTE:Donotplacedirectlyonvaporbarrier.Elevationisrequiredtoallow the condensate water to drain
via gravity.
Step#2:SetUpDrainLine
Thedrainlineshouldberoutedtoasuitabledrainontheoutside.Itmustflowdowntothedrainwithout
anyloops,dips,orvalleys.
1.Cutapieceof3/4"ODPVCthatisapprox.6"long.
2.InsertPVCintoa3/4"elbow,thenattachtoa3/4"ODlengthofPVCtodrain.
(Note:KeepthelengthofPVCdrainpipetoaminimum).
3.Inserttheopenendofthetubingintothe3/4"pipesothatitdoesnotextendintotheelbow
fitting.Forproperflow,aminimumdownwardslopeof1"per10'runisrequired.(Note:Ifaproper
downwardangleisnotpossible,thenitisrecommendedtouseanAirWerx90whichincludesan
integratedpump or utilizeanexternalcondensatepump).
4.SupportthePVCtubingsothatitmaintainsasmoothdownwardflowtodrain.
5.Alwaystestthedrainbeforeleavingtheinstallationarea.
RecommendedDrainOption-TransitiontoPVCPipe
Drain Tube - 12 inches Long. 12mm OD.
Step#3:Plugunitinto15ampgroundedcircuit.