User Guide

9
DehumidifierStorage
Iftheunitwillbestoredforanextendedperiodoftime,completethefollowingsteps:
1.Turnofftheunitandallowtodry.
2.Wrapandsecurethepowercord.
3.Coverthefiltermesh.
4.Storeinaclean,dryspace.
DuctedApplications
Ductingthedehumidifierallowstheunittobeinoneroomwhileconditioninganadjacentroom.The
inlet/returncollar(optionalaccessory,PN:W-103) is designed for 12" flex ducting while the supply
grille is designed for 6" flex ducting.
Be sure to secure the ducting with tie wrap. Also, keep in mind, that the supply ducting can be
screwed into an adapter if necessary.
DuctingInstallation
·Maximumtotal length ofduct run=10’
·Maximum length if only ducting inlet or outlet= 6'
·To connect 12"return ducting. it may be helpful to:
1. Remove inlet grille from end cap.
2. Connect duct to inlet grille.
3. Reconnect inlet grille to end cap.
Note:Thesupplyductadapterisstandardonallunits.Returnductis an optional accessory.
Installing Duct Adapter
Toinstalladapter,lineductup
withholesonthesideofunit
pushupfromthebaseofthe
adapter.
Removing Duct Adapter
If it is necessary to remove the
adapter, place hand at bottom of the
adapter and use your fingers to pull
out and down. This will remove the
cover hooks from the machine.
Electrical Access
·Unscrew the 4 screws on the side panel to access
the control board.