Specifications

88
89
Getting Connected to the Internet
The BASE lutea impressive networking capabilities will get you onto the Internet or
a corporate network (intranet) with ease.
You can use default connection settings to connect to the web via your mobile
network (GPRS/3G/EDGE), or Wi-Fi.
To get connected via GPRS/3G/EDGE you need a data plan with your service
provider. Also if the GPRS/3G/EDGE settings are not pre-configured on your
phone, please contact your provider. Changing the settings without talking to
your service provider could stop your phone from working.
Adding a New GPRS/3G/EDGE Connection
Before you begin, get the following information from your service provider:
• Access Point Name (APN)
• Your user name and password if needed
• Server IP and the port number if the network uses a proxy server
1. Tap Home Key >
> Settings > Wireless & networks > Mobile networks >
Access Point Names.
2. Tap Menu Key > New APN.
3. Tap Name to enter your APN name (it can be whatever you like).
4. Tap APN to enter the APN you want to add.
5. Tap Proxy and Port to enter the Server IP and port if the network uses a proxy
server.
6. Tap and enter Username and Password. (If there’s no username or password,
leave them blank.)
7. If needed, tap and enter APN type.
8. Tap Menu Key > Save to complete.
TIP: To set the APN to default settings, tap Menu Key > Reset to default.
Turning on Wi-Fi
Your Wi-Fi provides wireless Internet access over distances of up to 300 feet (100
metres).
1. Tap Home Key >
> Settings > Wireless & networks.
2. Tick the Wi-Fi box to turn it on.