How to Guide

ManualsBrandsBase'N Bench ManualsShower BasesWD4248C-RB42KIT

Tile Redi® Installation & Tiling Guide

Wonder Drain® Tileable Grate Assembly

I. COMPONENTS: (See Fig. 1)

1. Tileable Drain Grate (x 1)

2. Rubber Bumpers (x 4)

3. Drain Strainer (x 1)

4. Drain Recess

II. HOW TO TILE THE TILEABLE GRATE AND THE

SHOWER PAN FLOOR EDGES AROUND THE DRAIN

RECESS: (See Fig. 2)

1. Insert the Tileable Drain Grate into the Drain

Recess.

2. Dry fit the tiles to the shower pan floor and the

Tileable Drain Grate.

3. Note Tiling Tip: Before setting tile on the shower

pan floor and the tileable grate you must comply

with the following: tile up to the edges of the

recessed trench (A and B) and the edges of the

grate (C and D) so that neither the shower pan

floor nor the Tileable Drain Grate is visible, while

at the same time insuring (i) none of the Tileable

Drain Grate tiles extend beyond the edges of the

Wonder Drain® grate, (ii) none of the shower pan

floor tiles extend beyond the shower pan floor

into the space above the recessed drain, (iii)

proper drainage is achieved by having none of the

tiles encroach into the drainage space between

the tiled shower pan floor and the Tileable Drain

Grate, and (iv) neither the floor tile or the

Wonder Drain® grate tile will prevent the removal

of the tiled grate from the Drain Recess.

4. Now, remove the Tileable Drain Grate from the

Drain Recess and tile the shower pan floor. Then

insert the Tileable Drain Grate into the Drain

Recess and tile it, lining up any grout lines on the

tiled Wonder Drain® grate with the grout lines on

the surrounding shower pan floor tile.

Summary of content (6 pages)

PAGE 1
Tile Redi® Installation & Tiling Guide Wonder Drain® Tileable Grate Assembly I. COMPONENTS: (See Fig. 1) 1. Tileable Drain Grate (x 1) 2. Rubber Bumpers (x 4) 3. Drain Strainer (x 1) 4. Drain Recess II. HOW TO TILE THE TILEABLE GRATE AND THE SHOWER PAN FLOOR EDGES AROUND THE DRAIN RECESS: (See Fig. 2) 1. Insert the Tileable Drain Grate into the Drain Recess. 2. Dry fit the tiles to the shower pan floor and the Tileable Drain Grate. 3.
PAGE 2
III. HOW TO INSERT THE TILED DRAIN GRATE INTO THE TILED SHOWER PAN FLOOR: (See Figs. 1 & 3) 1. Insert the Rubber Bumpers into the Tileable Drain Grate side holes by inserting them into the holes until they are locked in place (Fig. 1). 2. Slide the tiled drain grate into the shower pan Drain Recess, first by compressing the side of the grate with the Rubber Bumpers against the wall of the shower pan Drain Recess (Fig. 3). 3.
PAGE 3
Tile Redi® Instrucciones de Instalacion y Azulejado Conjunto de Rejilla Wonder Drain® Tileable Drain Grate I. COMPONENTES: (Consulte la Fig. 1) 1. Rejilla Tileable Drain Grate (x 1) 2. Recubrimiento de Goma (x 4) 3. Canaleta de Drenaje (x 1) 4. Hueco del Desagüe II. CÓMO AZULEJAR LA REJILLA TILEABLE DRAIN GRATE Y LOS BORDES DEL PISO DE LA BANDEJA PARA DUCHA ALREDEDOR DEL HUECO DEL DESAGÜE: (Consulte la Fig. 2) 1. Coloque la rejilla Tileable Drain Grate en el Hueco del Desagüe. 2.
PAGE 4
III. CÓMO COLOCAR LA REJILLA AZULEJADA EN LA BANDEJA PARA DUCHA AZULEJADA: (Consulte las Figs. 1 y 3) 1. Coloque el Recubrimiento de Goma dentro de los orificios laterales de la rejilla Tileable Drain Grate, colocándoles en los orificios hasta que queden firmes en su lugar (Fig. 1). 2.
PAGE 5
Tile Redi® Instructions de Carrelage et d’Installation L’Assemblage de Grille Pouvant Être Couverte de Carreaux de Wonder Drain® I. COMPOSANTS: (Voir la Fig. 1) 1. Grille du Drain Pouvant Être Couverte de Carreaux (x 1) 2. Butoirs en Caoutchouc (x 4) 3. Pommelle de Drain (x 1) 4. Rainure-Guide de Drain II. COMMENT COUVRIR DE CARREAUX LA GRILLE POUVANT ÊTRE COUVERTE DE CARREAUX ET LES BORDS DU PLANCHER DU RECEVEUR DE DOUCHE AUTOUR DE LA RAINURE-GUIDE DE DRAIN: (Voir la Fig. 2) 1.
PAGE 6
III. COMMENT INSÉRER LA GRILLE COUVERTE DE CARREAUX DANS LE RECEVEUR DE DOUCHE COUVERT DE CARREAUX: (Voir les Figs. 1 & 3) 1. Insérez les Butoirs en Caoutchouc dans le trous latéraux de la Grille du Drain Pouvant Être Couverte de Carreaux en les insérant dans les trous jusqu’à ce qu’ils se fixent en place (Fig. 1). 2.