Instructions / Assembly

ManualsBrandsBase'N Bench ManualsBath34 in. x 72 in. Single Threshold Shower Base in Gray and Bench Kit with Left Drain and Oil Rubbed Bronze Trench Grate

Tile Redi® Installation & Tiling Guide

Redi Trench® Designer Drain Grate Assembly

I. COMPONENTS: (See Fig. 1)

1. Designer Drain Grate (x 1)

2. Rubber Bumpers (x 4)

3. Drain Strainer (x 1)

4. Trench Recess

5. Vertical Drain Spacers: 2mm (x 2), 4mm (x

2), 6mm (x 2)

II. HOW TO TILE THE SHOWER PAN FLOOR

EDGES AROUND THE TRENCH RECESS: (See

Fig. 2)

1. Insert the Designer Drain Grate into the

Trench Recess.

2. Dry fit the tiles to the shower pan floor.

3. Note Tiling Tip: Before setting tile on the

shower pan floor you must comply with

the following: tile up to the edges of the

recessed trench (A and B) so that the

shower pan floor is not visible, while at the

same time insuring (i) none of the shower

pan floor tiles extend beyond the shower

pan floor into the space above the

recessed trench, (ii) proper drainage is

achieved by having none of the tiles

encroach into the drainage space between

the tiled shower pan floor and the

Designer Drain Grate, and (iii) the floor tile

will not prevent the removal of the

Designer Drain Grate from the Trench

Recess.

4. Now, remove the Designer Drain Grate

from the Trench Recess and tile the shower

pan floor.

Summary of content (6 pages)

PAGE 1
Tile Redi® Installation & Tiling Guide Redi Trench® Designer Drain Grate Assembly I. COMPONENTS: (See Fig. 1) 1. Designer Drain Grate (x 1) 2. Rubber Bumpers (x 4) 3. Drain Strainer (x 1) 4. Trench Recess 5. Vertical Drain Spacers: 2mm (x 2), 4mm (x 2), 6mm (x 2) II. HOW TO TILE THE SHOWER PAN FLOOR EDGES AROUND THE TRENCH RECESS: (See Fig. 2) 1. Insert the Designer Drain Grate into the Trench Recess. 2. Dry fit the tiles to the shower pan floor. 3.
PAGE 2
III. HOW TO INSERT THE DESIGNER DRAIN GRATE INTO THE TILED SHOWER PAN SO THAT (A) IT IS SPACED CORRECTLY FOR DRAINAGE AND (B) IT IS AT THE SAME LEVEL AS THE ADJACENT TILE: (See Figs. 1 & 3) 1. Select a combination of Vertical Drain Spacers (2mm, 4mm, and/or 6mm) so that the top surface of the Designer Drain Grate is at the same level as the top of the floor tiles adjacent to the trench. 2.
PAGE 3
Tile Redi® Instrucciones de Instalacion y Azulejado Conjunto de Rejilla Redi Trench® Designer Drain Grate I. COMPONENTES: (Consulte la Fig. 1) 1. Rejilla Designer Drain Grate (x 1) 2. Recubrimiento de Goma (x 4) 3. Canaleta de Drenaje (x 1) 4. Hueco del Desagüe 5. Espaciadores de Drenaje Verticales: 2mm (x 2), 4mm (x 2), 6mm (x 2) II. CÓMO AZULEJAR LOS BORDES DEL PISO DE LA BANDEJA PARA DUCHA ALREDEDOR DEL HUECO DEL DESAGÜE: (Consulte la Fig. 2) 1.
PAGE 4
III. CÓMO COLOCAR LA REJILLA DESIGNER DRAIN GRATE EN LA BANDEJA PARA DUCHA AZULEJADA DE FORMA TAL QUE (A) SE DEJE EL ESPACIO ADECUADO PARA EL DRENAJE Y (B) QUEDE AL MISMO NIVEL QUE LOS AZULEJOS ADYACENTES: (Consulte las Figs. 1 y 3) 1. Seleccione una combinación de Espaciadores de Drenaje Verticales (2mm, 4mm, y/o 6mm) para que la superficie superior de la rejilla Designer Drain Grate quede al mismo nivel que la parte superior de los azulejos del piso adyacentes a la rejilla. 2.
PAGE 5
Tile Redi® Instructions de Carrelage et d’Installation L’Assemblage de Grille de Conception de Redi Trench® I. COMPOSANTS: (Voir la Fig. 1) 1. Grille du Drain de Conception (x 1) 2. Butoirs en Caoutchouc (x 4) 3. Pommelle de Drain (x 1) 4. Rainure-Guide de Tranchée 5. Distanciers Verticaux du Drain: 2mm (x 2), 4mm (x 2), 6mm (x 2) II. COMMENT COUVRIR DE CARREAUX LES BORDS DU PLANCHER DU RECEVEUR DE DOUCHE AUTOUR DE LA RAINURE-GUIDE DE TRANCHÉE: (Voir la Fig. 2) 1.
PAGE 6
III. COMMENT INSÉRER LA GRILLE DU DRAIN DE CONCEPTION ÊTRE COUVERTE DE CARREAUX DANS LE RECEVEUR DE DOUCHE COUVERT DE CARREAUX AFIN QUE (A) ELLE SOIT ESPACÉE CORRECTEMENT POUR LE DRAINAGE ET (B) ELLE SOIT AU MÊME NIVEAU QUE LE CARRELAGE ADJACENT: (Voir les Figs. 1 & 3) 1.