How to Guide

III. HOW TO INSERT THE TILED DRAIN GRATE INTO

THE TILED SHOWER PAN FLOOR: (See Figs. 1 & 3)

1. Insert the Rubber Bumpers into the Tileable

Drain Grate side holes by inserting them into

the holes until they are locked in place (Fig. 1).

2. Slide the tiled drain grate into the shower pan

Trench Recess, first by compressing the side of

the grate with the Rubber Bumpers against

the wall of the shower pan Trench Recess (Fig.

3).

3. Finally, slide the other side of the tiled drain

grate into the shower pan Trench Recess.

IV. HOW TO REMOVE THE TILED DRAIN GRATE

FROM THE TRENCH RECESS: (See Fig. 4)

1. Insert your fingers or an Allen wrench into the

space between the tiled drain grate and the

Trench Recess wall (i.e., either between E and

F or between G and H), carefully lift out one

side of the grate and grab it with both hands

and then carefully remove the other side by

lifting the entire grate with your hands.