User manual

3G Cell Modem Upgrade for BaseStation 3200 Controllers in Pedestals
Page 5
8. Plug the other end of the USB-style power connector from the Ethernet switch into either of
the mini USB connectors on the control board.
9. Attach the other end of the Ethernet cable from the cell modem and to one of the ports on
the Ethernet switch.
10. Attach another Ethernet cable to the Ethernet switch and to the back of the controller
display.
11. Reconnect the orange power connector to the board in order to restore power to the
controller.
12. Verify that the LEDs on the cell modem are illuminated.
13. Close the pedestal door, and then restart the controller by turning the dial to the RUN
position.