User manual

3G Cell Modem Upgrade for BaseStation 3200 Controllers in Pedestals
Page 4
2. Align the two holes on the top of the plastic mounting panel with the two bolts. Thread the
nuts onto the bolts, and then tighten them snugly.
3. If it is not already plugged in, plug the power cord into the cell modem module.
4. Plug the Ethernet cable into the Ethernet jack on the cell modem module.
5. Attach the antenna cable to the connector on the cell modem module labeled WWAN Main.
6. If it isn’t already plugged in, plug the USB-style power connector into the Ethernet switch port
labeled PWR INPUT.
7. Plug the 5-pin connector from the cell modem into one of the 5-pin male connectors on the
control board.