User manual

3G Cell Modem Upgrade for BaseStation 3200 Controllers in Pedestals
Page 3
3. Open and remove the front door on the lower part of the pedestal.
4. Find the orange power connector on the wires coming from the transformer. Gently pull the
connector away from the board to disconnect the power.
5. Find where the antenna cable connects to the 2G cell modem, and then disconnect the
antenna cable from the cell modem. Leave the antenna and antenna cable in place.
6. Remove the 5-pin connector from the control board.
7. Remove the screws that are holding the cell modem to the pedestal.
8. Remove the cell modem from the pedestal.
9. Dispose of the 2G cell modem according to your state regulations.
Step 3 – Install the 3G Cell Modem
1. On the inside wall of the pedestal, remove the two lower nuts from the bolts that secure the
antenna riser. Leave the bolts in place.