User manual

3G Cell Modem Upgrade for BaseStation 1000 Controllers in Pedestals
Page 5
7. Reconnect the orange power connector to the board in order to restore power to the
controller.
8. Replace the pedestal door, and then restart the controller by pressing the RUN button.
Step 4 – Activate Your SIM Card with Baseline
Using the information on your 3G Cell Modem Upgrade Information card that came with your
upgrade kit, fill out your information on the electronic 3G Cell Service Upgrade Form. This form is
available online at the following URL:
www.baselinesystems.com/3g-upgrade-form
IMPORTANT! Baseline will not activate your SIM card until we have received your 3G Cell Service
Upgrade Form with your valid billing information. Be sure to read the Wireless Service Terms and
Conditions that is linked to the 3G Cell Service Upgrade Form.
Please allow 2 business days after Baseline receives your 3G Cell Service Upgrade Form for your
SIM card to be activated.
Step 5 – Verify the Cell Modem Connection in the
Controller
After Baseline informs you that your SIM card has been activated, go to your BaseStation controller
and verify that the cell modem is connected to the cellular network.
1. On the BaseStation 1000 controller, press the System Setup button. The System Setup menu
displays.
2. Press the

button to highlight the Network Setup option, and then press the OK button to
select it. The Network Setup menu displays.
After the cell modem hardware has been installed and is powered up, the Cell Modem Info
option displays on the Network Setup menu.