User manual

3G Cell Modem Upgrade for BaseStation 1000 Controllers in Pedestals
Page 2
To update the BaseStation 1000 firmware from the Baseline web site
You will need a computer with a USB port. This computer must have access to the Internet. You
also need a USB (thumb) drive. You download the firmware from the Baseline web site to the USB
drive. Then, you take the USB drive to the controller and install the update.
1. Go to the Baseline web site at the following URL:
www.baselinesystems.com
2. On the home page, click Support.
3. In the left navigation bar, click Firmware Version Updates.
4. Click the BaseStation 1000 tab.
5. Follow the instructions on the web page to download the update. You can also click the
Printable Instructions link on the web page to display the instructions in a format that is
suitable for printing.
To update the BaseStation 1000 firmware from BaseManager
You can use this method when your controller is connected to the Internet. This method installs
the firmware update directly from BaseManager to your controller.
We recommend that you back up your current configuration before starting this process in case
you need to restore your system. Refer to Backing Up the Controller Programming in your
controller’s user manual.
Note: You can update the controller remotely by performing the following steps in LiveView.
1. Press the System Setup button. The System Setup menu displays.
2. Press the

button to highlight the Network Setup option, and then press the OK button to
select it. The Network Setup menu displays.
3. Press the

button to highlight the BaseManager Info option, and then press the OK button
to select it. The BaseManager Info screen displays. Verify that your controller is connected to
BaseManager.
4. Press the Back button to return to the System Setup menu.
5. Press the

button to highlight the Firmware Update option, and then press the OK button to
select it. The Firmware Update menu displays.
6. Press the

button to highlight the BaseManager Update option, and then press the OK
button to select it. The BaseManager Update screen displays.
7. Verify that the firmware update is available.
8. Press the + button to apply the update. When the update is complete, the controller restarts
and briefly displays the new firmware version.
Note: If the firmware did not update as expected, please call Baseline Support at
866.294.5847.