Installation Instructions

UM-19-016 15 2/16/2021
The handheld will remain operational while charging, allowing the
operator to continue operations while the unit is charging.
NOTE: It is not recommended to charge the handheld in a
cold environment such as overnight in the vehicle. This will
severely limit the lifespan of the batteries.
WARNING
Do not charge the batteries unless the LOW BATTERY indicator
is active. This will shorten the useful life of the batteries. The
handheld is designed to provide a long operation with each
charge, therefore continuous recharging is not needed.
Do not charge the handheld unit with any device other than the
supplied BASE charger or damage to the unit may occur.
DO NOT CHARGE IN A HAZARADOUS AREA.
UM-19-016 16 2/16/2021
WARNING
NEVER GO UNDER A TRUCK WITH THE ENGINE RUNNING AND
NEVER USE THE REMOTE CONTROL DEVICE TO ACTIVATE THE
PTO WHEN WORKING ON OR SERVICING THE PTO FROM
UNDER THE TRUCK. THE REMOTE CONTROL DEVICE IS
INTENDED TO BE USED ONLY WHEN THE OPERATOR IS NOT
AT RISK OF BEING INJURED BY THE MACHINE.
AN UNINTENTIONAL USE OF REMOTE WHILE WORKING ON THE
TRUCK MAY RESULT IN SERIOUS INJURY OR DEATH.
SYSTEM MAINTENANCE
1. Regularly check the condition of the handheld.
2. Check the transmitter battery condition by verifying that the blue
LED flashes properly when pressing a function button or the ON
button.
3. Ensure communication is functioning properly between the
handheld and the truck.
- If one of the system check fails, contact the factory and we will
troubleshoot your handheld unit.
- Handheld repairs or modifications must be done at the factory to
maintain your warranty or certification.