Installation Guide
QCI0280 Page12 Cerfied6/27/14
15Place large Vinyl Seal [15] on Door Panel [2] so that the vinyl edge sticks out
towards the Fixed Glass Panel [1]. Then place smaller 3/8” Vinyl Seal [6] on the handle
side of the Door Panel [2] so that the vinyl edge sticks out towards the inside of the
shower. (See Example) Use silicone to hold in place.
Large Vinyl Seal
3/8” Vinyl Seal
16The larger vinyl seal will need to be cut slightly in order for the header bar to have
space to roll freely. See example below.
Large Vinyl Seal










