Installation Sheet

Lift the interior g lass panel into position with
the rollers engaging the groove in the header [ F ].
Repeat for the exterior panel. If panels are not parallel
to their respective wall jambs, remove and adjust the
rollers up or down in their slots to compensate.
11
0
EXTERIOR
HEADER
INTERIOR
PANEL
EXTERIOR
PANEL
TUB
TRACK
QCI5022 REV.4
Certified 11/24/2020
Please Note: Panels will need to be very close to the
center of the opening in order to be installed.
If there is ever reason to remove the panel, the panel
will again need to be centered in the opening.