Installation Sheet
Textured glass lites [G] should be installed with the
textured surface to the exterior of the unit.Clear
glass does not have a preferred side to face out. If
your unit was purchased with AquaglideXP be sure
the treated surfaces are installed to the inside of the
shower
If not installed from the factory, install the hanger
brackets onto the glass. On the outside panel, the
roller is installed to the outside. On the inside panel,
the roller is installed to the inside.
8
ROLLER
BEARING
HEADER
GLASS
PANEL
ROIRETNI
LENAP
HANGER
BRACKETS
ROIRETXE
LENAP
QCI5022 REV.4
Certified 11/24/2020
9
Attach the Rollers to the Hanger Bracket as shown. Center the Roller and screw in the slot length. Temporarily
tighten the screw in this position. The roller will be moved later when adjusting the panel.