Instruction manual

INSTRUCTION MANUAL FOR INSTALLATION, MAINTENANCE AND USE Rev-09
PM.IE 8-9-1-R-GN-DU-GB-09
3
ELECTRIC KETTLES INDIRECT
“PM8-9IE..A” “PM1IE..A” “PMRIE..A” “PM9IE..GN”
1 GENERAL REMINDERS AND NOTES
1.1 GENERAL REMINDERS
−
− Read the warnings contained in this manual carefully as they provide important information concerning
safety during the installation, use and maintenance of the appliance.
− Keep these instructions carefully!
− Only personnel trained for its specific use should use the equipment.
− Keep the appliance under control during use.
− The appliance should be used only for the purpose for which it has been specifically designed; other uses
are improper and hence dangerous.
− During operation surfaces can become hot and require special operation.
− Unplug the appliance in case of failures or improper operation.
− Apply exclusively to a service centre for repairs or maintenance.
− Any important information about the appliance required for technical service is contained in the technical
data plate (see figure “View of appliance”).
− If technical assistance is required, the trouble must be described in as much detail as possible, so that a
service technician will be able to understand the nature of the problem.
− Gloves should be worn to protect the hands during installation and maintenance operations.
− Warning! : Follow the fire prevention regulations very carefully.
1.2 CONSTRUCTION
− Main structure in AISI 430 with 4 adjustable height feet.
− Panels in stainless steel AISI 304, thickness 10-12/10.
− Cooking vat in stainless steel AISI 316, thickness 20/10.
− Chrome-plated brass drainage tap.
− Lid in stainless steel, hinged and spring balanced in all opening positions.
− Jacket and lining in stainless steel AISI 304, thickness 15-20/10.
− Heating system comprising shielded heating elements made from “Incoloy-800” alloy with boiler and steam
circulation.
− Jacket pressure is controlled by a safety valve set at 0.5 bar; the appliance is equipped with an analogue
pressure gauge.
− The cold / hot water connection is 10 mm (mod. 100/150 lt.).
− The cold / hot water connection is ½" (mod. 200/300/500/170/270/370 lt.).
− Safety thermostat to interrupt operation automatically in case of failures.
− The appliance is equipped with a three-position selector with three heating functions:
− position “0” Heating not activated
− position “1” Reduced power 50%
− position “2” Full power 100%
− Operating thermostat for temperature adjustment inside the cooking vat.