User Guide

- 23 -
5.2 Installation and connection
• Discard the complete packing material after unpacking the device.
• Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
• Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
• You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
• Do not place any flammable liquids, gases or other easily flammable objects on or
close to the device.
• The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
• Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.3 Operating
• Connect the device to an individual, earthed mains outlet.
• Place the pots with the warm coffee or tea onto the provided heater plates. Each
heater plate can be switched on and off with a separate toggle switch.
• Turn on the desired heater plate with the toggle switch.
• The beverages are kept warm at approx. 65°C .
WARNING! Danger of burn!
Do not touch the hot surfaces of the heating plates to prevent burns on your
fingers or hands.
• If you do not use the heater plate any longer, turn it off and separate the device
from the mains outlet (pull the mains plug).