User Guide

- 22 -
7. Troubleshooting
PROBLEM CAUSE SOLUTION
Plug the machine and get
through power supply, power
indicator is not on and heat.
•
Plug is not inserted well.
• Micro-switch contacts not
well.
•
Remove the plug.
• Contact retailer
Heating indicator is not on and
temperature is not raised.
•
Connection of electric heating
tube is loosened.
•
Contact retailer
Power indicator is on but the
setting temperature is not
raised.
• Temperature controller is
burned.
• Contact retailer
Temperature controller is
normal but indicator is not on.
• Indicator is burned. • Contact retailer
After circuit heating electric
heating tube is not heated.
•
The „over heating protecting
button“is available.
• RESET-switch .
Temperature control can not
be controlled.
•
Temperature limiter is out of
order.
•
Contact retailer
8. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance to the national
regulations. It is advisable to contact a company which is specialized in waste disposal, or just
contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for use before
disposal. For that purpose disconnect device from mains supply and remove mains
connection cable from the device.
NOTE!
For the disposal of the device please consider and act according
to the national and local rules and regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]