User Guide

- 17 -
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for storage
purposes, when moving or, in case of damages, when the device must be sent back to a repair center.
The outer and inner packing material should be removed completely from the device before
installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in your country.
Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please contact our
customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside indicated positioning-
and storage markings.
Packages should be stored under consideration of the following:
- Do not store outdoors.
- Keep it dry and dust-free.
- Do not expose it to aggressive media.
- Do not expose it to direct sunlight.
- Avoid mechanical shocks and vibration.
- In case of longer storage (> 3 months) make sure you check the state of the packaging and
the parts regularly. If required refresh or renew.
4. Technical data
4.1 Technical specifications
Description Ice cube maker “Compact Ice II”
Article no.:
A100.063G
Cooling agent/filling quantity: R600a / 130 g
Connection: 230 V 50 Hz 160 W
Body: Steel-grey – plastic
Capacity of tank: approx. 4,5 litres
Performance: 15 kg / 24 hours
Dimensions: W 380 x D 435 x H 431 mm
Weight: approx. 21 kg
We reserve the right to modifications!