User Guide

- 28 -

1. Pour the heated mixture in the lower bowl (4).

2. Activate the (6) "MOTOR ON/OFF" switch

(starting the worm screw).

3. The chocolate is suck under the tower (3) and

comes in through the upper part of the tower (3).

NOTE!

If the mixture has been prepared correctly, there

is a continuous outflow of the substance out of

the fountain and it covers all the tower.

During the work of the device it is possible to

supplement liquid chocolate.

Putting chocolate

NOTE!

A device failure or stopping the fountain stream can be prevented:

• Do not put any alimentary products.

• Never add any cold or cool liquids.

4. Spear chosen alimentary products with a wooden needle or a fondue fork and put

them in the flowing chocolate.

Finishing work

CAUTION!

Do not pour the needless amount of chocolate out to

the sink or to the toilet (danger of blocking pipes!)

Use containers or plastic bags and throw them to the

rubbish.

5. Activate the (6) " MOTOR ON/OFF" switch (the

worm screw will be turned off).

6. Activate the (5) "HEAT ON/OFF" switch and turn

off the heater.

7. Disconnect the device from the power supply (take out the plug!).