Operation Manual

- 22 -
4.2 Technical specification
Name Hot water dispenser 10l
Code-No.:
200054
Material: Tank and lid: stainless steel; base: plastic
Temperature range: 30 °C – 100 °C
Capacity: 10 liters
Power: 2.5 kW / 230 V 50 Hz
Dimensions: Ø 213 mm, H 505 mm
Weight: 2.3 kg
We reserve the right to make technical changes!
5. Installation and operation
5.1 Safety instructions
WARNING! Risk of electric shock!
The device must only be connected to a properly installed single socket with
protective contact.
Never remove the power cable by pulling the cable itself; always grab the plug
housing.
• Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
• The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
• Never place the device or other objects on the power cable.
• Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
• Do not use the device in case it does not function properly, has been damaged or
dropped.