User Guide

- 25 -
6. Cleaning and maintenance
6.1 Safety advice
o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o Clean the device regularly.
o Wash the device’s casing and hot plate with a moist cloth. A delicate cleaning agent
may be used for more stubborn dirt.
o Never use harsh or abrasive cleaning agents or sprays.
o Do not use steel wool for cleaning. It is possible that small pieces of the wool may
come into contact with electrical elements and create the risk of electrocution.
o Never use flammable substances for cleaning (spirit, etc.) as there is an increased
risk of fire or explosion when the device is reconnected.
o Use only soft cloths, never use abrasive objects which may scratch the device’s
surface.
o After cleaning, dry and polish the device using a soft, dry cloth.
o Ensure that the device has been properly cleaned before leaving it in a dry place.
6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.