User Guide

- 22 -
4.2 Technical specification
Name Electric double hot plate
Article no.:
150.310
Construction: Nickel-chrome steel
Power: 230V 50 Hz 2500 W
Temperature regulation: stepless
Heating plate power:
1000 W / 1500 W
Heating plate diameter:
155 mm / 190 mm
Dimensions: W 535 x D 225 x H 90 mm
Weight: 4 kg
We reserve the right to make technical changes!
5. Installation and operation
5.1 Safety instructions
WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
• See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
WARNING! Hot surface!
During operation some elements of the device very become hot. To avoid burns,
do not touch hot elements!
• Do not use the device in case it does not function properly, has been damaged or
dropped.
• Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.