User Guide

- 20 -
1. Pour 0.6 litres of water into the outer pot.
CAUTION!
Do not engage/ operate the party kettle when empty or dry.
Do not pour in more than 0,6 litres into the outer pot as otherwise this would cause an overflow
when inserting the inner pot.
2. Place the desired foods into the inner pot.
3. Afterwards place the filled inner pot into the party kettle.
4. Connect the device to the power socket.
5. Fluid adjustment of the energy control (levels 1-12) allows for heating of the soup kettle’s
contents at regular intervals.
NOTE!
Heating time depends on the quantity, contents, and temperature of water in the outer pot.
6. Cleaning and maintenance
6.1 Safety advice
o Before beginning with repair or cleaning works make sure the device has been disconnected from
power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the plug in water
or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not use any kind
of pressure water jet for cleaning the device!