Owner Manual
5
CARE AND MAINTENANCE
Connect the power cable to a 110-120V, supply that is located in a safe, dry area.
• The Pull-O Switch is used to control the power of the appliance.
• Once the power is on, the Pressing Switch on the heater is used to control the two heat sengs. Press
one me for 1500W，press again is o.
• The Remote control is also used to control the two heat sengs. Press one me for 1500W，press
again is o.
• Although the pao heater is shower proof, do not use when raining or in wet condions.
• Always disconnect the power cable from the electrical supply, when the pao heater is not in use.
Care and maintenance
• When disconnected from the electrical supply, clean the outside of the pao heater with a damp
cloth. Never use corrosive or solvent cleaners or immerse in water.
• Any maintenance or repairs including replacing the halogen tube should only be carried out by a
qualied electrician or by a recommended service center.
Technical specicaon
• Power supply 110-120V， 50~60 Hz，
• Waage max 1500w
• Insulaon class I