Owner Manual

OPERATION
3 4
Step 1: Lock the bracket by M3x6 screw and
M3x6 screw.
Step 2: Fix the heater with the bracket that
provided by using the 4pcs of M6*10mm
Screws and knobs ghtly.
Step 3: Fix the bracket on the wall by using the
4PCS M6*50mm screws that provided ghtly.
Step 4: This unit is only suitable for wall
mounng use, Forbidden to mount on the
roof.
Only use the halogen heater on a rm solid vercal wall where the Mounng Bar is in contact with
the wall.
1. Mount the heater outside or in a large open area and well away from any obstrucons such as
branches or where the heater is near any objects that can be aected by heat, such as furniture, curtains
or other inammable objects (minimum distance 3 feet meter).
2. Do not use near bath tubs, wash areas or swimming pools.
3. Do not use in unvenlated areas.
4. Do not use where gas, petrol, paint or other inammable goods are stored.
5. Do not push any items through, obstruct or cover the grill of the heater head.
6. Do not posion immediately above or below an electrical socket.
7. Do not move when connected to an electrical supply and always wait for the pao heater to cool
down before storing away.
8. Do not touch the heater head when in use.
9. Do not leave turned on and unaended especially when children and or animals are in the vicinity.
10. The indicaon of the dierent posions of switches shall be visible from a distance of 3Ft.
11. The Marking concerning covering shall be visible aer the heater has been installed. It shall not be
placed on the back of heaters.